Search This Blog

Saturday, July 2, 2011

Memphis Speedometer V2

Memphis Speedometer V2 is by far the best speedometer i have ever
seen! Right go to http://cleo.sannybuilder.com/ and download CLEO 4. Then Download Memphis speedometer V2
From http://www.4shared.com/file/159020253/83dcdd15/memphis_speedometer_v20.html
Now go to GTA SAN ANDREAS DIRECTORY usually C://Program Files/ROCKSTAR GAMES/GTA SAN ANDREAS
Open Gta san andreas/cleo and paste gasoline.cs and speed.cs found in the
download.
Then go in models/txd and paste speed.txd there
You are all set! Enjoy your new speedometer
Here are some controls:

• F10 – Enable Speedometer (only can be disable if you get out of the car)
• F9 – Reset the widescreen mode (if speedometer is in different scale of gasometer)
• F10 – Alternate the widescreen on/off (it memorizes when you enter the car again)
• F11 – Turn on/off engine
• F12 – Change gear type (Automatic, semi-auto or manual) 1)
• 0 – All disappear (but enabled)
• 9 – Gas disappear (but enabled, appear if the car’s on reserve)
• 8 – Speedometer disappear (but enabled)
• - – Cruise control
• . – Speed Limiter
• , – Speed Limiter increase speed
• m – Speed Limiter decrease speed
• end – Change Speedometer Display(Kms: partial and total, RPM and Km/h, RPM and Mph, Gear mode)
• pgdn – Lock doors (Simple, protect car)
• pgup – Lights (off, auto, on)

7 comments:

  1. owowo this is unque..wait i am testing for games !

    ReplyDelete
  2. After installing i cannot play missions!
    i walkin into the red circle and nothing happens

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. http://cleo.sannybuilder.com is down! i repeat http://cleo.sannybuilder.com is down!

    ReplyDelete